Switch Management Commands 2191
Mid1 0 0 0%
Mid0 0 0 0%
High 0 0 0%
Transmit Attempts Failures %Failure
-------------------------------------------------
All 145 0 0%
Monitoring Parameters
---------------------
Rising Threshold................................ 0%
Falling Threshold............................... 0%
Trap Severity................................. INFO
show checkpoint statistics
Use the show checkpoint statistics command to display the statistics for the
checkpointing process.
Syntax
show checkpoint statistics
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
When nonstop forwarding is enabled on a stack, the stack's management unit
checkpoints operational data to the backup unit. If the backup unit takes over
as the management unit, the control plane on the new management unit uses
the checkpointed data when initializing its state. Checkpoint statistics track
the amount of data checkpointed from the management unit to the backup
unit.
Example
console#show checkpoint statistics
To Next Page
Loading...
Need help?
General
