Audio Visual Bridging Commands 1103
QAV class B remap priority..................... 1
console#show msrp interface Gi1/0/12
MSRP Interface Admin Mode...................... Enabled
SRclassPVID.................................... 2
MSRP class A Boundary port status.............. True
MSRP class B Boundary port status.............. True
MSRP QAV class A delta bandwidth............... 75
MSRP QAV class A delta bandwidth............... 0
MSRP class A bandwidth (allocated/total)....... 0 / 0
MSRP class B bandwidth (allocated/total)....... 0 / 0
MSRP total bandwidth (allocated/total)......... 0 / 0
QAV class A priority........................... 3
QAV class A remap priority..................... 1
QAV class B priority........................... 2
QAV class B remap priority..................... 1
console#show msrp interface summary
Intf Mode SrPVID A-Prio A-Remap B-Prio B-Remap Boundary(A/B)
--------- --------- ------ ------ ------- ------ ------- -------------
Gi1/0/1 Enabled 2 3 1 2 1 True / True
Gi1/0/2 Enabled 2 3 1 2 1 True / True
Gi1/0/3 Enabled 2 3 1 2 1 True / True
Gi1/0/4 Enabled 2 3 1 2 1 True / True
Gi1/0/5 Enabled 2 3 1 2 1 True / True
Gi1/0/6 Enabled 2 3 1 2 1 True / True
show msrp reservations
Use this command to display the MSRP reservation information for an
interface.
Syntax
show msrp reservations [interface-id] [detail | summary ]
• interface-id—An interface identifier (physical).
• detail—Show detailed information on the reservations.
• summary—Show summary information on the reservations.
Default Configuration
This command has no defaults.
To Next Page
Loading...
Need help?
General
