Layer 3 Routing Commands 1485
match mac-list
Use this command to configure MAC ACL match criteria for a route map.
Use the no form of this command to delete the match statement from a route
map.
Syntax
match mac-list mac-list-name [mac-list-name]
no match mac-list [mac-list-name]
•
mac-list-name
—The MAC ACL name that identifies the MAC ACLs. The
name can be between 0 and 31 characters.
Default Configuration
There is no default configuration for this command.
Command Mode
Route Map mode
User Guidelines
The MAC ACL must be configured before it is linked to a route map. Trying
to link to an unconfigured MAC ACL causes an error.
Actions in the MAC ACL configuration are applied with other actions
configured in the route map. When a MAC ACL referenced by a route map is
removed, the route map rule is also removed.
Example
console(config-route-map)#match mac-list mac-test
route-map
Use this command to create a policy based route map. Use the no form of this
command to delete a route map or one of its statements.
Syntax
route-map map-tag [permit | deny] [sequence-number]
no route-map map-tag [permit | deny] [sequence-number]
To Next Page
Loading...
Need help?
General
