Security Commands 873
console# show authentication interface gi1/0/1
Port........................................... Gi1/0/1
Authentication Restart timer................... 300
Configured method order........................ dot1x mab captive-portal
Enabled method order........................... dot1x mab undefined
Configured method priority..................... undefined undefined
undefined
Enabled method priority........................ undefined undefined
undefined
Number of authenticated clients................ 1
Logical Interface.............................. 0
client mac addr:............................... 00:00:00:00:00:01
Authenticated Method:.......................... dot1x
Auth State..................................... success
Auth Status.................................... Authenticated
show authentication authentication-history
Use this command to display the authentication history on one or more
interfaces.
Syntax
show authentication authentication-history {interface-id | all}
• interface-id—Any physical interface.
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
console#show authentication authentication-history gi1/0/1
Time Stamp Interface MAC-Address Auth Status Method
To Next Page
Loading...
Need help?
General
