C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 157
The following procedure describes how to relevel zone size.
1. Navigate to MAIN MENU | SETUP | FLOORS. See Figure 56.
2. From the FLOORS menu, scroll and select Relevel Zone Size.
Figure 242: FLOORS Menu – Relevel Zone Size
3. From the RELEVEL ZONE SIZE menu, scroll and select the zone size.
Figure 243: RELEVEL ZONE SIZE Menu
4. Scroll right and press Save.
14.7 Releveling Delay
A delay time is set prior to the releveling process to allow the car to settle before triggering a
releveling operation.
The following procedure describes how to set the relevel delay time.
1. Navigate to MAIN MENU | SETUP | FLOORS. See Figure 56.
2. From the FLOORS menu, scroll and select Releveling Delay.
Figure 244: FLOORS Menu – Releveling Delay
3. From the RELEVELING DELAY menu, set the relevel delay time.
Figure 245: RELEVELING DELAY Menu
4. Scroll right and press Save.
To Next Page
General
