C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 349
2. From the MODULE STATUS menu, scroll and select Auto Status.
Figure 707: MODULE STATUS Menu – Auto Status
3. From the Auto Operation Status menu, view the state of operation.
Figure 708: Auto Operation Status Menu
40.9.4 Recall Status
The recall status displays the current state of the car. If car is recalled to a specific landing, the
state changes to:
• Unknown – The car is not attempting to recall.
• Moving – The car is attempting to recall and is in motion or trying to move.
• Stopped – The car is attempting to recall but is currently stopped at a non-recall floor.
• Recall Finished – The car is stopped at the requested recall floor and its doors are in a
requested state.
The following procedure describes how to view the recall status.
1. Navigate to MAIN MENU | DEBUG | Module Statuses. See Figure 66.
2. From the MODULE STATUS menu, scroll and select Recall Status.
Figure 709: MODULE STATUS Menu – Recall Status
3. From the Recall Status menu, view the state of the recall status.
Figure 710: Recall Status Menu
To Next Page
General
