C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 1
1 C4 Traction Controller
The C4 Traction Controller is the state-of-the-art high-speed/high-rise controller designed for
speeds up to 1400 fpm.
1.1 Overview
The C4 Traction Controller is built to learn and adapt.
The following is a list of C4 manuals included in the C4 package:
• C4 User Manual – A detailed description of the C4 Traction Controller including step by
step procedures on how to configure the system.
• C4 Faults and Alarms – A list of faults codes, alarm codes, and resolutions.
• C4 Testing Procedures – Step by step procedure on how to test the C4 Traction
Controller.
• C4 Drive Startup – Describes how to setup various drives that may be used within the C4
Traction Controller. The following is a list of drives that can be used on the C4:
• DSD412
• HPV900
• M1000
• KEB
• C4 GUI Manual – An in-depth description of how to use the Graphical User Interface to
configure the controller.
• C4 Load Weighing Device – Describes how to install and calibrate the Load Weighing
Device.
• C4 Emergency Rescue Device – Describes emergency operation sequence of events and
maintenance.
• C4 Parameter List – A detailed list of values that define the set conditions for the
controller. The parameters are job configurable.
To Next Page
General
