C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 249
29.13.1 Disable OSS
The Disable OOS feature prevents the car from ever going into the Out of Service mode of
operation or faulting out with OOS regardless of the Hourly Fault Limit or OOS input being
active.
The following procedure describes how to disable OSS.
1. Navigate to MAIN MENU | SETUP | MISCELLANEOUS. See Figure 58.
2. From the MISCELLANEOUS menu, scroll and select OOS.
Figure 445: MISCELLANEOUS Menu – OOS
3. From the OOS menu, scroll and select Disable OOS.
Figure 446: OOS Menu – Disable OOS
4. From the DISABLE OOS menu, scroll and select if out of service is disabled.
Figure 447: DISABLE OOS Menu
5. Scroll right and press Save.
29.13.2 Hourly Fault Limit
The hourly fault limit is the number of faults allowed per hour prior to the car going out of
service. The car remains out of service until the hour window elapses.
The following procedure describes how to set hourly fault limit.
1. Navigate to MAIN MENU | SETUP | MISCELLANEOUS. See Figure 58.
2. From the MISCELLANEOUS menu, scroll and select OOS. See Figure 445.
To Next Page
General
