C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 165
6. From the Input menu, scroll and select the configuration to be used as the Sabbath
input.
NOTE: The X input is a representation of a number between 1-8.
Figure 270: Input Menu
7. Scroll right.
8. Scroll and select Auto Operation. See Figure 270.
9. Scroll right.
10. Scroll and select Sabbath. See Figure 270.
11. Scroll right and press Save.
12. Press the left button and navigate to SETUP | SABBATH. See Figure 61.
13. Is the Sabbath operation being setup for Key Enable Only or Key or Timer Enable Only?
a. If the Sabbath Operation is being setup for Key Enable Only, go to step 14.
b. If the Sabbath Operation is being setup for Key or Timer Enable, go to step 18.
14. From the SABBATH menu, scroll and select Key Enable Only.
Figure 271: SABBATH Menu – Key Enable Only
15. From the KEY ENABLE ONLY menu, press the up button and select On.
Figure 272: KEY ENABLE ONLY Menu
16. Scroll right and press Save.
17. Press the left button until the SABBATH menu is displayed.
To Next Page
General
