C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 251
5. Scroll right and press Save.
29.13.4 Disable PI OOS
When disabled, the OOS does not flash on the PI when the car is out of group.
The following procedure describes how to disable the PI OOS.
1. Navigate to MAIN MENU | SETUP | MISCELLANEOUS. See Figure 58.
2. From the MISCELLANEOUS menu, scroll and select OOS. See Figure 445.
3. From the OOS menu, scroll and select Disable PI OOS.
Figure 452: OOS Menu – Disable PI OOS
4. From the DISABLE PI OOS menu, scroll and select the On to disable the PI OOS.
Figure 453: DISABLE PI OOS Menu
5. Scroll right and press Save.
29.14 En. 3 Digit PI
The enable 3 Digit PI allows for the use of 3-characters as opposed to the default of 2
characters for displaying PI labels.
The following procedure describes how to enable the PI to display 3-digit increments.
1. Navigate to MAIN MENU | SETUP | MISCELLANEOUS. See Figure 58.
2. From the MISCELLANEOUS menu, scroll and select Enable 3 Digit PI.
Figure 454: MISCELLANEOUS Menu – Enable 3 Digit PI
To Next Page
General
