C4 User Manual
Page 168 ©2021 Smartrise Engineering, Inc. All Rights Reserved October 25, 2021
33. Is the Sabbath Operation setup for Key or Timer Enable complete?
a. If the setup for Sabbath for Key or Timer Enable is complete, go to step 34.
b. If the setup for Sabbath for Key or Timer Enable is not complete go to step 38.
34. Scroll right and press Save. The process ends.
35. Navigate to SETUP | SABBATH. See Figure 61.
36. From the Sabbath menu, scroll and select Timer Enable Only.
Figure 281: SABBATH Menu – Timer Enable Only
37. From the TIMER ENABLE ONLY menu, press the up button and select On.
Figure 282: TIMER ENABLE ONLY Menu
38. Scroll right and press Save.
39. Press the left button until the SABBATH menu is displayed.
40. From the SABBATH menu, scroll and select Friday Start Time.
Figure 283: SABBATH Menu – Friday Start Time
41. Set the time the Sabbath starts.
Figure 284: FRIDAY START TIME Menu
42. Scroll right and press Save.
43. Press the left button until the SABBATH menu is displayed.
To Next Page
General
