C4 User Manual
Page 360 ©2021 Smartrise Engineering, Inc. All Rights Reserved October 25, 2021
42.2 Logged Faults
All faults that have occurred are logged. The Logged Faults displays a history of the last 32
faults.
The following procedure describes how to view the list of logged faults.
1. Navigate to MAIN MENU | FAULTS | LOGGED. See Figure 52.
2. From the FAULT LOG menu, view the list of faults of faults that have occurred.
Figure 739: FAULT LOG Menu
42.3 Cleared Faults
Cleared faults deletes the history of recorded faults.
The following procedure describes how to clear the log.
1. Navigate to MAIN MENU | FAULTS | CLEAR LOG. See Figure 52.
2. From the CLEAR FAULT LOG? menu, press the right button and select Yes.
Figure 740: CLEAR FAULT LOG? Menu
The table below lists the faults reported by software or hardware.
Table 60: Faults Reported by Software or Hardware
To Next Page
Loading...
Need help?
General
