C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 327
4. From the Secure Car menu, view the status of front or rear car doors that require
security access.
Figure 652: Secure Car Front Menu
Figure 653: Secure Car Rear Menu
34.12.1.2 Hall Call Security
The hall call security displays the status of the hall call security mask set on the remote
monitoring system. Each bit represents a set of four floors. For example, if floors 1 and 4 are set
for security access, then the display shows 00000009. If just floor 1 was set for security access,
then the displays shows 00000001. If no floors are set for security access, then the display
shows 00000000.
The following procedure describes how to view the hall call security status for front or rear
doors.
1. Navigate to MAIN MENU | STATUS | VIRTUAL INPUTS. See Figure 50.
2. From the REMOTE COMMANDS menu, scroll and select Hall Call Security.
Figure 654: REMOTE COMMANDS Menu – Hall Call Security
3. From the SECURE HALL CALLS menu, select either the front or rear hall calls.
Figure 655: SECURE HALL CALLS Menu – Front or Rear
To Next Page
General
