C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 179
3. From the DO ON DOOR OPEN menu, scroll and select On to enable the doors to open.
Figure 315: DO ON DOOR OPEN Menu
4. Scroll right and press Save.
16.14 Disable on CT Stop
Door outputs are disabled when the top CT Stop switch is enabled.
The following procedure describes how to disable all door outputs.
1. Navigate to MAIN MENU | SETUP | DOOR SETUP. See Figure 55.
2. From the DOORS menu, scroll and select Disable On CT Stop.
Figure 316: DOORS Menu – Disable On CT Stop
3. From the DISABLE ON CT STOP menu, scroll and select On to disable all door outputs.
Figure 317: DISABLE ON CT STOP Menu
4. Scroll right and press Save.
16.15 Disable on HA
Door outputs are disabled when the hoistway access is active.
The following procedure describes how to disable all door outputs.
1. Navigate to MAIN MENU | SETUP | DOOR SETUP. See Figure 55.
To Next Page
General
