C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 185
2. From the DOORS menu, scroll and select Check Time.
Figure 334: DOORS Menu – Check Time
3. From the CHECK TIME menu, set the time to check if the doors are considered safe.
Figure 335: CHECK TIME Menu
4. Scroll right and press Save.
16.24 Door Type
The door type is the type of door used on the front or rear landing. The user can set the
controller for a different type of door used on all front landings and all rear landings. The type
of doors are as follows:
• Automatic
• Freight
• Manual
• Swing
The following procedure describe how to select the front or rear door type.
1. Navigate to MAIN MENU | SETUP | DOOR SETUP. See Figure 55.
2. From the DOORS menu, scroll and select Door Type (Front or Rear).
Figure 336: DOORS Menu – Door Type (Front or Rear)
To Next Page
General
