Smartrise C4 User Manual

C4 User Manual
Page 178 ©2021 Smartrise Engineering, Inc. All Rights Reserved October 25, 2021
4. Scroll right and press Save.
16.12 DC On Close
The DC On Close activates a door close output while the doors are in a closed state. This can be
useful if doors require constant pressure to prevent relaxing.
The following procedure describes how to set the DC on Close.
1. Navigate to MAIN MENU | SETUP | DOOR SETUP. See Figure 55.
2. From the DOORS menu, scroll and select DC On Close.
Figure 312: DOORS Menu – DC On Close
3. From the DC ON DOOR CLOSE menu, scroll and select On to enable the doors to close.
Figure 313: DC ON DOOR CLOSE Menu
4. Scroll right and press Save.
16.13 DO On Open
The DC On Open activates a door open output while the doors are in an open state. This can be
useful if doors require constant pressure to prevent relaxing.
The following procedure describes how to set the DO on Open.
1. Navigate to MAIN MENU | SETUP | DOOR SETUP. See Figure 55.
2. From the DOORS menu, scroll and select DO On Open.
Figure 314: DOORS Menu – DO On Open

Smartrise C4 Specifications

General

Brand	Smartrise
Model	C4
Category	Controller
Language	English