C4 User Manual
Page 256 ©2021 Smartrise Engineering, Inc. All Rights Reserved October 25, 2021
29.17.4 Default I/O
The user has the option to restore original inputs and outputs.
The following procedure describes how to select default I/O.
1. Navigate to MAIN MENU | SETUP | MISCELLANEOUS. See Figure 58.
2. From the MISCELLANEOUS menu, scroll and select Default. SeeFigure 460.
3. From the DEFAULT menu, scroll and select Default I/O.
Figure 469: DEFAULT Menu – Default I/O
4. From the DEFAULT I/O? menu, select if restoring original inputs and outputs.
Figure 470: DEFAULT I/O? Menu
5. From the DEFAULT I/O? menu, select Yes to default I/O.
NOTE: If not defaulting I/O, select NO to back out.
The system automatically defaults all parameters. See Figure 463.
6. When the system has completed defaulting all parameters, the DEFAULTING PARAMS
menu displays Parameters Defaulted. See Figure 464.
29.17.5 Default Factory
The user has the option to restore original factory settings.
The following procedure describes how to select default factory.
1. Navigate to MAIN MENU | SETUP | MISCELLANEOUS. See Figure 58.
2. From the MISCELLANEOUS menu, scroll and select Default. See Figure 460.
3. From the DEFAULT menu, scroll and select Default Factory.
Figure 471: DEFAULT Menu – Default Factory
To Next Page
General
