C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 167
26. From the SABBATH menu, scroll and select Destinations Up.
Figure 277: SABBATH Menu – Destinations Up
27. From the UP DESTINATIONS menu, scroll and select the up destination for the Sabbath.
• Ensure the highest down destination is below the highest up destination.
• Ensure the lowest down destination is above the lowest up destination.
• Up destinations should be different from down destinations.
Figure 278: UP DESTINATIONS Menu
28. Scroll right and press Save.
29. Press the left button until the SABBATH menu is displayed.
30. From the SABBATH menu, scroll and select Destinations Down.
Figure 279: SABBATH Menu – Destinations Down
31. From the DOWN DESTINATIONS menu, scroll and select the down destination for the
Sabbath.
Figure 280: DOWN DESTINATION Menu
32. Is the Sabbath Operation being setup for Key Enable Only, Timer Enable Only, or Key or
Timer Enable?
a. If the Sabbath Operation is being setup for Key Enable Only, go to step 34.
b. If the Sabbath Operation is being setup for Timer Enable Only, go to step 34.
c. If the Sabbath Operation is being setup for Key or Timer Enable, go to step 33.
To Next Page
General
