C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 311
2. From the EMS menu, scroll and select Fire Overrides Ph1.
Figure 619: EMS Menu – Fire Overrides Ph1
3. From the FIRE OVERRIDES PH1 menu, scroll and select if a fire override Phase 1 EMS
operation.
Figure 620: FIRE OVERRIDES PH1 Menu
4. Scroll right and press Save.
33.5.4 Ph1 Exit Delay
Phase 1 exit delay is the time a car remains in EMS Phase 1 (due to an emergency medical hall
call) prior to returning to normal operation.
The following procedure describes how to set the time a car returns to normal operation from
EMS Phase 1.
1. Navigate to MAIN MENU | SETUP | EMS. See Figure 60.
2. From the EMS menu, scroll and select Ph1 Exit Delay.
Figure 621: EMS Menu – Ph1 Exit Delay
To Next Page
General
