Xerox WorkCentre 5225 Service Manual

February, 2008
2-216
WorkCentre 5225, 5230
016-707, 016-708
Launch Version
Status Indicator Raps
016-707 Sample Print RAP
Proof Print Registration failed because it cannot be stored without a HD.
Initial Actions
Power Off/On
Procedure
Check HDD electrical connections (PL 9.2).
If the problem occurred at installation, check whether the operations for Proof Print are correct.
016-708 HDD Full Annotation/Watermark RAP
When an Annotation/Watermark image was to be stored in the HDD, the Full status was
detected and the job was aborted.
Initial Actions
Power Off/On
Procedure
Check HDD electrical connections (PL 9.2).
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists, replace the HDD (PL 9.2).

Xerox WorkCentre 5225 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Internal memory	No MB
Type	Digital copier