Xerox WorkCentre 5225 Service Manual

February, 2008
2-615
WorkCentre 5225, 5230
116-376, 116-377
Status Indicator Raps
Launch Version
116-376 Port 9100 Software RAP
An internal shutdown occurred after a processing error.
Initial Actions
Power Off/On
Procedure
Pull out and insert or replace the DIMM (PL 9.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 9.2).
116-377 Video DMA RAP
A Video DMA (Direct Memory Access) failure is detected.
Initial Actions
Power Off/On
Procedure
Reinstall or replace the DIMM (PL 9.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 9.2).

Xerox WorkCentre 5225 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Internal memory	No MB
Type	Digital copier