Xerox WorkCentre 5225 Service Manual

February, 2008
2-223
WorkCentre 5225, 5230
016-723, 016-724
Status Indicator Raps
Launch Version
016-723 Punch Position Error RAP
Job Cancel by Punch Position NG. A job was cancelled because the punch position was
impossible.
Procedure
• Check the Punch settings for the print data to be sent to the printer.
• Check the client driver settings or PC settings.
016-724 Staple Position RAP
The staple selection and hole punch selection is not compatible.
Initial Actions
Ensure the staple position selection and hole punch position selection is compatible (no holes
will be punched on staples or staples located in holes)
Procedure
Refer customer to following User Guide headings:
• [Image Rotation] - [Rotation Direction Screen]

Xerox WorkCentre 5225 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Internal memory	No MB
Type	Digital copier