Xerox WorkCentre 5225 Service Manual

February, 2008
2-685
WorkCentre 5225, 5230
124-372, 124-373
Status Indicator Raps
Launch Version
124-372 IOT Controller Software RAP
Due to an error in the software of the IOT Controller, subsequent processes cannot be performed.
Procedure
Reload Software (ADJ 9.3.1).
Reinstall or replace the DDR DIMM (PL 9.2).
Replace the ESS PWB (PL 9.2).
124-373 IOT Manager Software RAP
BSD-ON:16.1
Due to an error in the software of the IOT Manager, subsequent processes cannot be performed.
Procedure
Reload Software (ADJ 9.3.1).
If the problem persists reinstall or replace the DDR DIMM (PL 9.2).
If the problem persists reinstall or replace the ESS PWB (PL 9.2).

Xerox WorkCentre 5225 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Internal memory	No MB
Type	Digital copier