Xerox WorkCentre 5225 Service Manual

February, 2008
2-321
WorkCentre 5225, 5230
024-340, 024-341
Status Indicator Raps
Launch Version
024-340 IOT-ESS Communication Failure 1 RAP
An abnormal parameter is set for the send function.
Initial Actions
Refer to BSD 3.1, 16.1.
Procedure
Check that P/Js 402 on the MCU PWB (PL 9.1) and P/J 310 on the ESS PWB (PL 9.2) are
securely connected.
If the problem persists, reload Firmware (ADJ 9.3.1).
024-341 IOT-ESS Communication Failure 2 RAP
A transmission failure occurred, the Sequencing number of the sent Message Packet is incor-
rect.
Initial Actions
Refer to BSD 3.1, 16.1.
Procedure
Check that P/Js 402 on the MCU PWB (PL 9.1) and P/J 310 on the ESS PWB (PL 9.2) are
securely connected.
If the problem persists reload Firmware (ADJ 9.3.1).
If the problem persists, replace the MCU PWB (PL 9.1).

Xerox WorkCentre 5225 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Internal memory	No MB
Type	Digital copier