Xerox WorkCentre 5225 Service Manual

February, 2008
2-595
WorkCentre 5225, 5230
116-330, 116-331
Status Indicator Raps
Launch Version
116-330 HDD File System RAP
The HDD Check detected an error during power on or the HDD is not formatted.
Initial Actions
Power Off/On
Procedure
Check the HDD electrical connections (PL 9.2).
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists replace the HDD (PL 9.2).
If the problem persists, replace the ESS PWB (PL 9.2).
116-331 Invalid Log Information RAP
A log error is detected.
Initial Actions
Power Off/On
Procedure
Remove the HD, switch off the power, reinstall the HD, and switch on the power.
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists replace the HDD (PL 9.2).
If the problem persists, replace the ESS PWB (PL 9.2).

Xerox WorkCentre 5225 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Internal memory	No MB
Type	Digital copier