Xerox WorkCentre 5225 Service Manual

February, 2008
2-470
WorkCentre 5225, 5230
035-705, 035-706
Launch Version
Status Indicator Raps
035-705 Fax Protocol RAP
BSD-ON:16.1/17.1
The NSS (Non-Standard Facilities Set-up) signal was sent out three times but there was no
response from the receiving Fax, or the DCN (Disconnect) signal was received.
Resending of DCS/NSS (Digital Command Signal/Non-Standard Facilities Set-up) signal
exceeded the limit.
Procedure
There is a problem with the receiving Fax. Ask customer to cancel the job and resend.
035-706 Fax Protocol RAP
BSD-ON:16.1/17.1
When sending the NSS (Non-Standard Facilities Set-up) signal, fall back could not be done or
a fall back error occurred (In User/Auto Resend Standby).
Procedure
There is a problem with the receiving Fax. Ask customer to cancel the job and resend.

Xerox WorkCentre 5225 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Internal memory	No MB
Type	Digital copier