Xerox WorkCentre 5225 Service Manual

February, 2008
2-473
WorkCentre 5225, 5230
035-711, 035-712
Status Indicator Raps
Launch Version
035-711 Fax Protocol RAP
BSD-ON:16.1/17.1
DCN (Disconnect) signal or an invalid command was received from the receiving Fax when
sending in Phase-D.
Procedure
There is a problem with the receiving Fax. Ask customer to cancel the job and resend.
035-712 Fax Protocol RAP
BSD-ON:16.1/17.1
A NSC (Non-Standard Facilities Command) signal resulted in one of the following:
• The password was incorrect.
• Stored documents/originals for polling was not set on the receiving Fax.
• Document jam on the receiving Fax.
Procedure
There is a problem with the receiving Fax. Ask customer to cancel the job and resend.

Xerox WorkCentre 5225 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Internal memory	No MB
Type	Digital copier