Xerox WorkCentre 5225 Service Manual

February, 2008
2-608
WorkCentre 5225, 5230
116-361, 116-362
Launch Version
Status Indicator Raps
116-361 Spool HDD RAP
The controller spool detected an error during HDD access.
Initial Actions
Power Off/On
Procedure
Check the HDD electrical connections (PL 9.2).
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists replace the HDD (PL 9.2).
116-362 SSDP Software RAP
An internal shutdown occurred after an SSDP (Simple Service Discovery Protocol) processing
error.
Initial Actions
Power Off/On
Procedure
Pull out and insert or replace the DIMM (PL 9.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 9.2).

Xerox WorkCentre 5225 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Internal memory	No MB
Type	Digital copier