Establishing the connection to the wireless network
(WLAN)
—
Activate the Wi-Fi access point on the Wi-Fi
device. Refer to the manufacturer's instruction
manual.
tainment has an appropriate CarStick modem
connected.
Function buttons of the
Network Settings
menu
Opens the submenu for setting the co-
—
Click
switch to the
Access Points (Wi-Fi)
menu.
for ac-
Connection to the mobile operator
(
Mobile phone settings
menu) to which the
SIM card
used
is com-
pressed.
—
Activate the Wi-Fi network in the infotainment
system. To do so,
activate the checkbox
Wi-Fi
.
Data roaming
: Data roaming is disabled. In order to be
able to use a data connection
—
Click and select from the list the point
of
data abroad must be active
desired Wi-Fi access point. The search for
available Wi-Fi access points may take a few
minutes.
—
If necessary, enter the network key of the Wi-Fi
hotspot in the infotainment system and sign
with
OK
.
The WLAN (wireless) connection is established. To
finalise the connection, it may be necessary to enter
additional data on the Wi-Fi device.
Manual Settings
: to manually enter the network
settings of an external Wi-Fi device.
Infotainment cannot be used as both access
point and client at the same time.
Wi-Fi network. To connect the infotain- ment as a
client to a Wi-Fi device, first connect the infotain-
ment as a client to a Wi-Fi device.
Additional costs may be incurred! Check
with your mobile phone provider for
information on applicable roaming charges.
Current connection details
: display of data packages sent
and received via infotainment. The display
may differ from the mobile network
operator's (provider's) data.
Reset to factory settings
: Resetting to factory settings
deletes the entries and settings made.
Internet connection
: opens a context menu with the
selection options
Do not allow
(data
connection is not established),
Show warning
(such a connection is only established after
the access point has to be disconnected from the
in- and out-port.
confirm the
consultation) and
(said
fotainment.
Due to the large number of different Wi-Fi devices
in existence, it is not possible to guarantee
that all functions run smoothly.
The availability of the Wi-Fi function depends
on the country and may vary.
Open the
Network Settings
menu
connection is established automatically).
Function buttons of the
Mobile phone settings
menu
Access point name
: Name of the access point of the
mobile network operator for the mobile
phone connection. The name is
automatically configured by means of a
predefined setting and can be changed
further, if necessary, in accordance with the
instructions of the respective mobile phone
provider.
Username
: user name to access the telephony
provider's access point.
—
system
.
to access the
Settings
menu
of
the
mobile. The user name is automatically
configured by a default setting and can be
changed manually, in the following ways
OR:
in the
Car-Net
main menu press
to access the
Car-Net settings
menu
(online services
)
.
If necessary, in accordance with the
instructions of the mobile telephony
provider concerned.
—
Click
to open the
Network Settings
menu.
Password
: password to establish the connection
—
Press the function button of the area for which
the settings are to be made. The changes are
automatically applied when a menu is closed.
Please note: The
Network settings
menu is only
visible if
there is a SIM card in the infotainment system, if a
Bluetooth rSAP connection is established or if the
infotainment system is connected to the network.
To Next Page
Loading...
Need help?
General
