Information for the driver
Avoid operating the stopwatch while riding as
much as possible.
•
Only make presettings in the stopwatch and
consult the statistics when the vehicle is
stopped.
•
When driving, do not operate the chronometer
in difficult driving situations.
2.
Press the
Vehicle
function button .
3.
Press the function button
Selection
.
4.
Press the
Sport
function button . The power
monitor is displayed.
5.
To switch to the stopwatch, press one of the
arrows on the power monitor.
With the arrows you can switch between the
stopwatch and the power monitor at any time.
Measuring lap times
The stopwatch measures times in two zones:
The red hand and the numeric value in the centre
show the current time in seconds; the smaller
indicator in the centre area shows minutes and
seconds.
The display on the right shows the current lap time
to an accuracy of 1/100 seconds. If no lap with split
times has yet been saved, there is no difference
between the stopwatch time and the lap time.
Personalisation
Using the personalisation function, individual
vehicle settings, e.g. for air conditioning,
instrument panel or lighting, can be saved in a We
Connect user account. The user identifies himself
by logging into his We Connect user account in the
infotainment system.
Changes made to the settings will be assigned to
the user account that is active in the vehicle and,
if there is an active Internet connection, will be
automatically saved online in the We Connect
account.
Greeting and user account selection
After switching on the ignition, the name of the
detected user is displayed in the infotainment
system. If the automatic key assignment is
activated, the user is recognised by the vehicle key.
If the automatic key assignment is not active, the
last user who logged in to the vehicle is always
displayed.
If you are not a recognised user, you have the
following options:
—
Select your user account from the
corresponding list if you are already logged in to
the vehicle.
—
Log in to your We Connect user account with
your access data and add your user account to
the list of users.
—
Create a new user account directly in the
vehicle if you are not already registered with
We Connect.
If you do not wish to log in and register with We
Con- nect, the infotainment system has a guest
account. When you switch to this account, the
current vehicle settings are retained.
Once you have logged in, the vehicle settings saved
online will be loaded and activated. The first time
you log in to the vehicle with your user account,
the factory settings are active.
If the vehicle is equipped with memory
function seats, you can manually cancel at
the display of the infotainment system that the
corresponding setting is taken.
Change user account
You can select the user account in the user
administration menu. In this menu you can activate
another existing user account in the vehicle, log in
to an existing We Connect account or register for
We Connect with a new account.
Automatically assign a vehicle key
to a user
account
If automatic key assignment is selected, the next
key will be assigned to the user account when the
user account is changed:
—
Vehicles without Keyless Access: The key with
which the vehicle was unlocked.
—
Vehicles with "Keyless Access" keyless locking
and start system: The key detected first by the
personalisation function when opening the
driver's door.
To Next Page
Loading...
Need help?
General
