Volkswagen GLI 2020 User Manual

Seat functions
87
1
2
— Pull out the headrest in the direction of rotation
→ fig. 79 2 .
Fitting the front head restraints
— Place the head restraint in the correct position
on top of the corresponding backrest rails and
insert it into the rails.
— Press the head restraint down until the bars
engage.
— Adjust the head restraint according to the
instructions for the correct position on the seat.
Removing the rear centre head restraint
— Unlock the centre part of the rear seat
backrest and fold it forward.
— Raise the head restraint as far as it will go.
— Press the → button fig. 80 on the workrest
guide.
— At the same time, press the → key fig. 80 while
a second person pulls out the chin rest
completely.
— Lift the rear seat backrest and fit it correctly.
Fitting the rear centre head restraint
— Unlock the centre part of the rear seat
backrest and fold it forward.
— Place the head restraint in the correct position
on top of the centre seat backrest rails and
insert it into the rails.
— Lower the headrest at the same time as you press
the button
→ fig. 80 2 .
— Lift the rear seat backrest and fit it correctly.
— Adjust the head restraint according to the
instructions for the correct position on the seat.
Seat functions
Memory function
Fig. 81 On the outer side of the driver's seat:
memory buttons.
Memory key
The memory buttons can be used to store and
activate settings for the driver's seat and exterior
rear view mirrors.
Save the settings of the driver's seat and door
mirrors for forward travel.
— Engage the electronic parking brake.
— Put the gear in the neutral position.
— Switch on the ignition.
— Adjust the driver's seat and door mirrors.
— Press the key for more than 1 second.
→ fig. 81.
— Press the memory button to which you wish to
save the settings within approx. 10 seconds. An
acoustic signal confirms the saving.
Save the settings of the passenger 's exterior rear-
view mirror for reverse gear
— Engage the electronic parking brake.
— Put the gear in the neutral position.
— Switch on the ignition.
— Press the desired memory button → fig. 81.
— Engage reverse gear.
— Adjust the passenger's exterior mirror so that,
for example, he/she can see the kerb.
The position set for the rear-view mirror is
automatically saved and assigned to the key with
which you unlocked the vehicle.
Activate the driver's seat and door mirror settings
— With the vehicle stationary, the ignition switched
off and the vehicle door open, briefly press the
17A012760AF

Volkswagen GLI 2020 Specifications

General

Brand	Volkswagen
Model	GLI 2020
Category	Automobile
Language	English