Transporting children safely
Fitting an ISOFIX or i-Size child seat
Please note and at the beginning of this chapter on page 52.
Overview table for ISOFIX or i-Size installation
The marking of the ISOFIX or i-Size anchorage
points depends on the equipment and the country
concerned.
The following table shows the mounting possibilities
of ISOFIX or i-Size child seats to the corresponding
anchorage points in the different seating positions of
the vehicle.
Group 0
: up to 10 kg
Orienta-
backwar
ds
Orienta-
X
E/R1 X IL-SU
E/R1 X X
Group 0+
: up to 13 kg
do to D/R2 X IL-SU X
back
C/R3 X X
Oriente
d
towards
D/R2 X X
C/R3 X
X
Group 1
: 9 to 18 kg
back
IL-SU, IUF
—
Size class: The indication of the size class
corresponds to the body weight of the child seat.
In the case of child seats with "universal" type
approval
or "semi-universal", the size class is indicated on
the ECE type-approval label. The size class is
indicated on the corresponding child seat.
—
X: Seat not suitable for the attachment of an
ISOFIX or i-Size child seat of this group.
—
IL-SU: Seat suitable for fitting an ISOFIX child
seat with "semi-universal" approval. Please
observe the vehicle list of the child seat
manufacturer.
Orienta-
Class seat/
for
ISOFIX
class
years
Rear Rear
seats
Rear
seats
•
Make sure that the support leg is installed
correctly and securely.
Incorrect use of the support leg can result in
serious or fatal injuries.