Seats and head
restraints
Dismantling and mounting of the
head
restraints
When removing and fitting the head restraints,
avoid bumping them against the headlining, the
front seat backrest or other parts of the vehicle.
Failure to do so may result in damage.
Adjusting the height of the rear centre head restraint
The head restraint in the centre seat can be adjusted.
—
Move the head restraint up or down in the
direction of the arrow and, if necessary, press
the → button → fig. 78 1 at the same time.
The head restraint has to fit correctly in one
position.
Adjusting the head restraints
Please note and , at the beginning of this
chapter
, on page 85.
Fig. 77 Front head restraint: adjustment.
Fig. 78 Rear centre head restraint: adjustment.
Adjusting the height of the front head restraints
—
Move the head restraint up or down in the
direction of the arrow and, if necessary, press
the → button → fig. 77 1 at the same time.
The head restraint has to fit correctly in one
position.
Please note and at the beginning of this
chapter on page 85.
Fig. 79 Front head restraint: removal.
Fig. 80 Rear head restraint: removal.
Removing the front head restraints
—
If necessary, lower the head restraint.
—
To unlock it, look for the recess at the back of
the backrest in the area marked
→ fig. 79 1 , press and hold in the direction of
the arrow.
back of the head as close as possible to the
head restraint and centred.
•
Never adjust the head restraint while the head
restraint is in use.
march.