Mercedes-Benz 2005 Sprinter User Manual

INSTALLATION
(1) Install the hydraulic control unit into the rub-
ber mounts (Fig. 5).
(2) Reconnect the brake lines to the hydraulic con-
trol unit (Fig. 5). Do not mix up the brake lines.
Tighten the lines to 16 N·m (142 in. lbs.)
(3) Reconnect the multiplug to the control module
(Fig. 5).
(4) Reconnect the ground cable on the battery.
(5) Bleed the brake system.
(6) Check the fluid in the reservoir and correct if
necessary.
(7) Perform function test.
5 - 32 BRAKES - ABS VA
HCU (HYDRAULIC CONTROL UNIT) (Continued)

Mercedes-Benz 2005 Sprinter Specifications

General

Brand	Mercedes-Benz
Model	2005 Sprinter
Category	Automobile
Language	English