PIAGGIO PORTER 1.3 16V 2008 User Manual

2. Return coil check
With an ohmmeter, make sure that there is con-
tinuity between the ST and C terminals. If this does
not occur, replace the remote control.
3. Seal coil check
Always using an ohmmeter, make sure that there
is continuity between the ST terminals and the re-
mote control body. If there is no continuity, replace
the remote control.
Bearing check
1. Measure the inside diameters of the bushings,
transmission seat and the cover.
2. Measure the rotor bearing outside diameter.
Electrical system PORTER 1.3 16V
ES - 108

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English