PIAGGIO PORTER 1.3 16V 2008 User Manual

2. Tighten the oil pressure switch to the specified
torque value, using a box-spanner.
Locking torques (N*m)
Oil pump - Oil pressure switch 12÷20
Cooling system
Coolant pump
Water pump fitting
1. Fit a new water pump gasket on the cylinder
block.
2. Fit and tighten the water pump to the specified
torque value.
N.B.
- WHEN STUD BOLTS ARE LOOSENED OR REPLACED,
APPLY THE RECOMMENDED PRODUCT ONTO THE
THREADED SECTION FROM THE CYLINDER BLOCK
SIDE.
Recommended products
Three Bond 1377B Adhesive sealing com-
pound
-
Locking torques (N*m)
Cylinder block - Water pump 15 ÷ 22
Engine PORTER 1.3 16V
EN - 360

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English