PIAGGIO PORTER 1.3 16V 2008 User Manual

Referen
ce
values
Temper-
ature (°
C)
-30 -20 20 80 120
Resist-
ance
(kOhm)
28.6 16.2 2.45 0.33 0.18
(CANISTER VSV) Vacuum switchover valve for
bleeding fuel evaporative emissions.
Check continuity between the outlets.
Specifications: there must not be continuity.
2. Apply voltage to the connector terminals of the
CANISTER VSVvalve and check continuity be-
tween openings.
Specifications: there must be continuity.
3. Measure the resistance value between termi-
nals.
Characteristic
specified value:
from 30 to 34 Ohm at 20°C
Spark plug
The spark plug could be too hot. Watch out not to get burned.
1. Check that the spark plug is not dirty or too hot.
2. Check the gap between spark plug electrodes using the proper tool.
Characteristic
Electrode gap = 0.9 / 1.0 mm
3. Check the value of the spark plug internal re-
sistance.
Characteristic
Specified value:
3.0° - 7.5 Ohm
Iniection System PORTER 1.3 16V
IS - 540

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English