PIAGGIO PORTER 1.3 16V 2008 User Manual

10. Fit the rubber ring, brake spring and the safety
plate in the respective order on the rotor shaft
11. Position and fix the rear cover with the two
screws.
12.Refit the remote control in the relevant housing,
while paying attention to hook the remote control
to the control lever. Finally, lock the remote control
with the 2 screws.
13. Connect the cable to the remote control.
Installazione sul veicolo
Installation
Once removal and fitting operations are finished, perform function controls and, afterwards, fit the starter
motor on the vehicle.
Alternator
Recharge system
PORTER 1.3 16V Electrical system
ES - 111

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English