PIAGGIO PORTER 1.3 16V 2008 User Manual

3. Filling with coolant.
4. Connect the battery negative (-) terminal.
5. Start the engine and check for possible leaks. If
there are leaks, repair the point at which the leak
is detected.
Radiatore
Radiator removal
1. Disconnect the battery negative (-) terminal.
2. Drain the coolant as follows:
•
Set the heating control lever to "hot".
•
Remove the front panel gasket.
•
Remove the radiator cap.
- NEVER OPEN THE RADIATOR CAP AND/OR THE DRAINAGE PLUG WHEN THE COOLANT IS
HOT.
KEY:
1. Cap for heating air breather pipe.
2. Engine side cap
3. Radiator cap
4. Heating
5. Radiator
6. Engine
PORTER 1.3 16V Engine
EN - 367

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English