Fari fendinebbia
Fog light headlamps
Removal/fitting
1. Operating from the front compartment of the
bumper disconnect bulb holder 1 with the bulb and
remove it from the fog light headlamp support 2.
2. Remove bulb 3 from bulb holder 1.
To refit the fog light headlamp, carry out the same
operations but in reverse order.
Fog light headlamp replacement
1. Operating from the front compartment of the
bumper, disconnect connector 1 from bulb holder
2.
2. Undo the four fixing screws 3 of the fog light
headlamp 4 on support 5.
3. Remove the fog light headlamp 4 with the bulb
holder and bulb.
To refit the fog light headlamp, carry out the same
operations but in reverse order.
Electrical system PORTER 1.3 16V
ES - 156