PIAGGIO PORTER 1.3 16V 2008 User Manual

Flywheel
Flywheel test
1. Visually inspect the flywheel to detect any
cracks, wear or other damage.
2. Visually inspect the crown gear to detect any
worn areas, cracks or other damage. Replace the
crown gear, if necessary.
Crown gear replacement
1. Position the flywheel on an adequate wooden
block. Remove the crown gear by using a punch
together with a hammer.
2. Position a new crown gear on the flywheel in a
horizontal position.
3. With a torch, heat the crown gear evenly, until
due to its own weight, it adapts to the flywheel.
N.B.
- DO NOT FORCE THE CROWN GEAR.
- DO NOT COOL THE CROWN GEAR QUICKLY BY USING
WATER.
4. Let the crown gear gradually cool down.
Engine PORTER 1.3 16V
EN - 234

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English