Drain the coolant and detach water pipes.
Detach the delivery and reverse fuel pipe.
CAUTION
•
THE PRESSURE INSIDE THE FUEL DUCT IS
APPROX. 284 KPA HIGHER THAN THE AT-
MOSPHERIC PRESSURE.
•
THEREFORE, REMOVE THE PIPES GRADU-
ALLY TO AVOID FUEL SPRAYING.
•
Remove the inlet manifold.
•
Remove the exhaust manifold.
Pagina Manuale VTL
Exhaust pipe
E.G.R. circuit intake duct
Head removal
1. Remove the ignition coil unit from the cylinder
head cover.
PORTER 1.3 16V Engine
EN - 257