Cooling Circuit
Cooling electric fan check
1. Turn the switch key to «ON». Make sure that the
electric fan does not start turning when the liquid
temperature is below 92° C. Should this occur,
check the electric fan thermoswitch, and the cable
harness for possible short-circuits.
2. Disconnect the radiator thermoswitch connec-
tor.
3. Check that the radiator fan turns properly with
the ignition switch set to "ON" when the jumper is
connected to the connector terminals for the ther-
moswitch. If the fan does not turn, check the fan
motor assembly, fuse and remote control.
4. Connect the connector to the radiator thermos-
witch.
Electrical system PORTER 1.3 16V
ES - 174