PIAGGIO PORTER 1.3 16V 2008 User Manual

•
Place the external radial ball bearing
using the following tool:
N.B.
- MAKE SURE THAT THE BEARING IS IN CONTACT WITH
THE STOP SECTION OF THE STEERING ARTICULATION.
Specific tooling
020188y Axial hub support and driving pinion
tool series - Front axle bearing and differential
pinion replacement kit
•
Place the internal and external oil seal,
using the following tool:
Specific tooling
020223y Extractor and changer for front sus-
pension arm bushing
3. Place the wheel shaft in the articulation
Use the following tool:
Specific tooling
020224y Connecting rod bushing extractor and
changer
Verifiche e regolazioni
Preliminary checks before the wheel alignment
check
1. Tyre wear check
2. Correct tyre pressure control
3. Checking bolt tightening of affected parts
PORTER 1.3 16V Suspensions
SS - 703

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English