PIAGGIO PORTER 1.3 16V 2008 User Manual

2. Fit and tighten the water pump to the specified
torque value.
N.B.
- WHEN STUD BOLTS ARE LOOSENED OR REPLACED,
APPLY THE RECOMMENDED PRODUCT ONTO THE
THREADED SECTION FROM THE CYLINDER BLOCK
SIDE.
Recommended products
Three Bond 1377B Adhesive sealing com-
pound
-
Locking torques (N*m)
Cylinder block - Water pump 15 ÷ 22
Oil filter fitting
1. Apply a reduced quantity of engine oil onto the
oil filter gasket.
2. Screw the oil filter until the gasket makes con-
tact with the oil pump.
3. Then, turn once more the oil filter completely
(360°).
Engine PORTER 1.3 16V
EN - 322

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English