PIAGGIO PORTER 1.3 16V 2008 User Manual

4. Apply a thin layer of sealant onto the outlet union
contact section from the head to the throttle body.
5. Drive the union with a wooden wedge and a
hammer. Place the union so that the pipe is in an
orthogonal position with respect to the head sur-
face.
6. Once these operations have finished, remove
each protruding adhesive residue, any wood
splinters etc.
Fitting the valve spring seats on the head
Fit the valve spring seats on the head.
Engine PORTER 1.3 16V
EN - 282

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English