Camshaft pulley fitting
1. Fit the camshaft pulley on the camshaft, so that
the "F" mark remains visible and matches the po-
sition notch.
2. Fit the screws locking the pulley, avoiding that
the latter rotates, inserting a steel rod inside the
pulley hole or using the special tool.
•
DO NOT ROTATE THE CAMSHAFT
•
BE CAREFUL NOT TO DAMAGE THE CYLIN-
DER HEAD CLOSING SURFACE GASKET.
•
SCREWS AS WELL AS THREADED HOLES
MUST BE DRY DURING TIGHTENING.
Specific tooling
020172Y TOOL TO LOCK THE TIMING BELT
PULLEY
Locking torques (N*m)
Timing system pulley screws 15÷22
Tension spring connection
Connect the tension spring to the timing belt ten-
sioner.
Attach the tension spring ring to the pin.
Fit the belt tensioner and fixing screw.
•
ATTACH THE SPRING RING FIRMLY ON THE
RELEVANT PIN.
•
MAKE SURE THAT THE PIN ON THE OIL
PUMP IS FITTED IN THE TENSIONER HOLE.
Valve timing - Belt refitting
Timing belt fitting
1. Temporarily fit the head cover.
Engine PORTER 1.3 16V
EN - 244
To Next Page
Loading...
Need help?
General
