PIAGGIO PORTER 1.3 16V 2008 User Manual

Installation
1. Apply MP grease onto each of the sliding sec-
tions.
2. Fit the retention plate by tightening the two bolts.
3. Fit the lock block by tightening the two relevant
bolts.
4. Fit the lock block using the fixing device.
5. Check and adjust the locking device.
Regolazioni
Door panel
Prescribed alignment sizes
J distance
Prescribed value: 3.6-8.6 mm
K distance
Prescribed value: 4.6-8.6 mm
P distance
(Standard)
Prescribed value: 5.5-9.5 mm
(Not standard)
Prescribed value: 7.0-11.0 mm
Tolerance for each side
Prescribed value: Not exceeding 2.0 mm
Height difference:
Prescribed value: Not exceeding ± 1.5 mm
Tolerance between right and left sides
Prescribed value: Not exceeding 2.0 mm
Chassis PORTER 1.3 16V
CH - 772

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English