PIAGGIO PORTER 1.3 16V 2008 User Manual

•
The turn indicator bulbs flash one time
indicating that the procedure has fin-
ished.
•
Refit the insulating cap on the white
wire.
Final operations:
•
Once the insulating cap on the white
wire is refitted, reinstall the door lock-
ing control unit in its original seat.
•
Refit the glove-box in its original seat
and fix it with the corresponding
screws.
SYSTEM MAINTENANCE
In order to maintain the central locking system, it is necessary to adopt some simple tactics, listed below:
REMOTE CONTROL:
Recommendations of use:
The system remote control does not require par-
ticular tactics for its working. As every electronic
device, avoid exposing it to violent shocks, ex-
tremely high temperatures and immersing it in any
type of fluid. Remember that, on summer days, the
instrument panel of vehicle can get significantly
hot if it is exposed to the sun.
Battery replacement:
For its operation, the remote control uses alkaline
batteries. Batteries are subject to a gradual loss of
their charge with the regular use of the remote
control. The more the remote control is used the
faster the batteries will be discharged. To prevent
failures of the central locking operated by remote
control, the latter has inside a device that indicates
the battery charge status. When using the remote
control regularly, press the control switch and the
green transmission LED turns on to remain stead-
ily on. In case the battery charge status should
decrease below the standard level in order to guar-
PORTER 1.3 16V Electrical system
ES - 131

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English