2. Support points for workshop jack
Front side: apply the jack to the cross-member of
the front suspension.
Rear side: apply the jack to the lower section of the
differential
Leakages
Fluid leaks
Check for possible fluid leaks from the following components:
- Engine
- Transmission
- Differential
- Fuel pipe
- fuel tank and drainage plug
- Fuel internal filler
Riscontri porte
Door lock adjustment
1.Loosen the screws of the door striker square
plate.
2.Place the striker correctly and tap it with a plastic
hammer.
3.Tighten the door screws again:
Locking torques (N*m)
Door stop plate - Chassis 20 - 30
PORTER 1.3 16V Pre-delivery
PD - 805